Serverfiles MartySama 5.8 r642 p21 (Ultima versiune - Clean)

[alasta]

ty

 

[kecskeslaszlo94]

THANK U

 

[mihaimiti301]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

 

[apofos6661]

Rád by som vám bezplatne ponúkol tento serverový súbor: Martysama 5.8 r642 p21 (najnovšia verzia). Je to úplne čistá verzia, presne taká, aká je dostupná na oficiálnej webovej stránke Martysamy.
Pre tých, ktorí poznajú Martysamu, tieto serverové súbory sú založené na pôvodných systémoch Martysamy a neobsahujú žiadne zadné vrátka. Robím to preto, lebo som bol nedávno zablokovaný z komunity Martysamy za zverejnenie konfigurácie, o ktorej si myslím, že mala byť zahrnutá priamo v balíku, ktorý som si zakúpil.
Táto konfigurácia mala byť ponúknutá automaticky pri kúpe servera, ale bohužiaľ proces zahŕňa dodatočnú žiadosť, po ktorej nasleduje schválenie, po ktorom k nej sotva získate prístup. Pre tých, ktorí plánujú v budúcnosti kúpiť Martysamu, varujem, aby očakávali nasledovné:
[*]Výrazné oneskorenia (5 – 7 dní) pri prijímaní odpovede na jednoduchý tiket.
[*]Obmedzená podpora a akékoľvek problémy súvisiace so serverom (nie výlučne so serverovými súbormi) si budú vyžadovať dodatočný poplatok.
[*]V priloženom archíve nájdete všetko, čo potrebujete na inštaláciu. Dúfam, že vám tento materiál bude užitočný!
Vyžaduje FreeBsd 14+
[KÓD=cpp]pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="ÁNO"
spustenie služby mysql-server
mysql
NASTAVIŤ HESLO PRE root@localhost=HESLO('ParolataMysql');
ukončenie[/KÓD]
Stiahnuť: *** Skrytý text: nie je možné citovať. ***

Thanks

 

[killeru90]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

aaa

 

[honzab123]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

ty

 

[Nalesnik2115]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

thank you <3

 

[hertus3k]

Nice!

 

[byszajbus]

Nice

 

[Nalesnik2115]

ty bro <3

 

[Andzej]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

ty

 

[candhony]

thanks

 

[sem117]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

yeessss ty

 

[Kuqsal]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

I think Not original but I can checking

 

[Sandrix1993]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

nice

 

[gaminator]

thanks

 

[klars]

ty

 

[stkyadigg]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

Thanks

 

[wagrtrfgdsx]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

 

[Anthony]

I would like to offer you for free this serverfile: Martysama 5.8 r642 p21 (latest version). It is a completely clean version, exactly as it is available on the official Martysama website.
For those familiar with Martysama, these serverfiles are based on Martysama's original systems and contain no backdoors. I make this gesture because I have recently been banned from the Martysama community for posting a config that I believe should have been included directly in the package I purchased.
This config should have been offered automatically when purchasing the server, but unfortunately the process involves an additional request, followed by approval, after which you will barely get access to it. For those planning to purchase Martysama in the future, I warn you to expect the following:
[*]Significant delays (5-7 days) in receiving a response to a simple ticket.
[*]Limited support, and any server related issues (not strictly serverfiles related) will require additional payment.
[*]In the attached archive you will find everything you need for installation. I hope you find this material useful!
Requires FreeBsd 14+

pkg install -y mariadb1011-server gmake python python3 git
sysrc mysql_enable="YES"
service mysql-server start
mysql
SET PASSWORD FOR root@localhost=PASSWORD('ParolaTaMysql');
exit

Download: *** Hidden text: cannot be quoted. ***

thanks